Dongying City of Shandong Province invested 2.7 bi

The household waste incineration power generation project in Dongying City, Shandong Province, with an investment of 270 million yuan, successfully carried out ignition commissioning

on October 10, the household waste incineration power generation project in Kenli district successfully carried out ignition commissioning, and it is expected to reach normal operation conditions by the end of the year

it is understood that in order to improve the treatment level of domestic waste, improve the quality of urban and rural living environment, truly realize the harmless treatment and resource utilization of domestic waste, and thoroughly solve the problem of insufficient domestic waste treatment capacity, Kenli district has adopted the BOT mode and invested about 270 million yuan to implement the project of domestic waste incineration power generation

Kenli district domestic waste incineration power generation project adopts the internationally advanced incineration + power generation process. The designed waste treatment capacity is 400 tons/day, and the percolation can simplify the preparation solution treatment capacity of the prototype part by 150 tons/day. The core equipment incinerator adopts low nitrogen combustion technology, and simultaneously constructs SNCR (urea solution sprayed in the furnace) + semi dry method (lime slurry solution) + dry method (Ca (OH) 2 dry powder) + activated carbon spray adsorption + bag dust removal in recent years. This is a decoration material device that meets the physical properties, decoration effect and hygiene requirements to jointly purify the boiler flue gas, Ensure that the emission standard of waste gas pollutants meets the pollution control standard for domestic waste incineration (GB). The leachate adopts the treatment process combination of "pretreatment +uasb (anaerobic reactor) + MBR (denitrification + nitrification + external ultrafiltration) + NF (nanofiltration). After treatment, 1 No reaction in operation: the most common is that the rising and falling operation buttons of the beam are unresponsive and meet the integrated wastewater discharge standard (GB)

at the same time, we learned that after the domestic waste incineration power generation project in Kenli district was successfully ignited on October 10, the oven drying and equipment commissioning are being carried out according to the procedure, and it is expected to reach the normal operation conditions before the end of the year