The hottest Terex coexists with the history of the

Terex and space shuttle history coexist

Guide: Terex amp; reg; CC is the main crane used for the lifting of the space shuttles discovery and enterprise. On June 6, 2012, the space shuttle discovery was finally carried to Dulles International Airport in Washington, D.C., with a journey of nearly 150million miles. Space flight discovery

terex CC is the main crane used for the lifting of the space shuttles discovery and enterprise.

Washington, U.S., June 6, 2012 - the space shuttle discovery was finally carried to Dulles International Airport in Washington, D.C., with a journey of nearly 150million miles. The space shuttle "discovery IEA: the future global installed capacity of renewable energy power generation will increase by 40%. It made its first flight on August 30, 1984. In its service life of more than 27 years, it has successfully carried out 39 space missions. It is the most frequently flown and legendary space shuttle among all NASA space shuttles

on April 17, 2012, the space shuttle "discovery" completed its last flight on a Boeing-747 space shuttle carrier, which was popular among the audience and the Washington area, the United States and international media. The media widely reported its ultimate journey and recorded it in the history of space exploration

after dozens of arduous space missions, James at the Steven udwal hatch center of the Smithsonian Aerospace Museum In the McDonnell space shuttle hangar, the space shuttle Discovery replaced the early Space Shuttle Enterprise parked here. Before being transported from Dulles International Airport to the final exhibition site, the space shuttle discovery was hoisted onto the Boeing-747 carrier and its landing aircraft was lowered to the proper position for the last time

how to unload the space shuttle Discovery from the Boeing-747 carrier when it is not in the space center? This is not only the focus of mainstream media attention and popularity, but also the task of J.F. lomma, Inc., located in South Carney, New Jersey. To this end, Terex CC crawler crane began to operate

historic lifting load

from the late night of April 19 to the early morning of April 20, 2012, the crane crew of Loma and United Aerospace alliance skillfully unloaded the 196400 pound (89085 kg) space shuttle Discovery from the Boeing-747 carrier. "This part of space shuttle history is unimaginable," said Frank Signorelli, crane and payload manager of Loma. "It is a unique experience", added Josh Barnett, the on-site service representative of Terex crane company, who assisted Loma in the lifting operation on site, and the production enterprises took measures to reduce production capacity and stabilize prices

Loma has participated in historic tasks in providing services to New Jersey and New York, coastal markets and some international markets. This includes the provision of cranes and lifting services for the construction operations still being carried out at the world trade center

ensure that the experimental machine will not be overloaded and damaged

about two years ago, Loma company began to plan the task, when the company's management first considered bidding for the task. NASA puts forward very clear requirements on what kind of semi-automatic impact testing machine is required for the mission. "The bidding document clearly stipulates that Terex CC is the main crane for this lifting task, and also stipulates other auxiliary cranes and equipment," Signorelli said

part of the reason is that NASA used this crane model for a similar lifting experience decades ago. When the Boeing-747 carrier aircraft carries the space shuttle to places outside the space center, it is necessary to use cranes and lifting equipment. "This kind of lifting doesn't happen very often because NASA has developed space shuttle unloading methods at each space center," Barnett explained

123 next page